Friday, July 26, 2019
LTE measurement parameters analysis Essay Example | Topics and Well Written Essays - 1750 words
LTE measurement parameters analysis - Essay Example The development of the long-term evolution is said to be the natural upgrade of the receivers. This receiver uses the CDMA designs that were established in 2000 and the GSM/UMTS set-ups to transmit signals (Rumney, 2013, 17). The long-term evolution is currently marketed as the 4G wireless technology service; LTE is not enough to fulfill the technical requirements that are adopted by the 3G. These necessities were initially accompanied by the ITU-R systems in its progressive specification in IMT (Korowajczuk, 2011, 29). Due to pressure generated by the market and the tremendous advancement that are associated by HSPA and the long-term evolution to the inventive 3G technologies, the fourth generation LTE technology was developed by the ITU. The major aim for the development of the LTE was to increase the speed and capacity of the wireless data networks through the use of digital signal processing modulations and techniques that were developed in the beginning of the year 2000. Some of the key reason that caused the development of the LTE was to simplify and redesign the network architecture to the current IP based system. The IP systems have a reduced transfer capability as compared to the 3G structural design. LTE wireless edge is usually harmonious to the 2G and the 3g network technologies. The technology must be worked on a different wireless spectrum (Korowajczuk, 2011, 77). In the long-term evolution, the following parameters are used on the location signal. The first one is the conventional signal power indicator (RSSI).It is used in computing the normal amount of power received and observed by the OFDM symbols which have the reference symbols for the antenna port 0.port 0 measures the bandwidth over the N source blocks. The second parameter is the reference signal received power. This is a form of measurement that is used in parameter RSSI. The parameters are transmitted
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.